Description
- 40W laser output and 240W machine power
- Cuts 20mm cork and 0.15mm stainless steel
- 25000mm/min cutting speed
- High-precision, ultra-fine engraving
- Integrated automatic air assist
- Advanced safety features
- Supports offline creation and dynamic preview
The Creality Falcon2 40W Laser Engraver is a powerful tool designed for precision cutting and engraving. With its 40W laser output and 240W machine power, it can effortlessly cut through 20mm cork and 0.15mm stainless steel in a single pass. This advanced machine can directly engrave colored patterns on various materials, including mirror stainless steel, ceramics, and opaque glass. Its ultra-fast cutting speed of 25000mm/min enhances productivity, making it an essential device for professionals.
Powerful 40W Laser Output
The Creality Falcon2 boasts a 40W laser output and 240W machine power, enabling it to cut through 20mm cork and 0.15mm stainless steel effortlessly. It can also engrave colorful patterns on mirror stainless steel, ceramics, and opaque glass.
25000mm/min Cutting Speed
With an impressive cutting speed of 25000mm/min, the Falcon2 significantly boosts productivity. The integrated automatic air assist enhances cutting ability and quality, reducing the hassle for users.
Ultra-fine Carving and Cutting
The machine's all-aluminum alloy anodized structure provides excellent motion stability. This durability translates to higher precision, producing more realistic and vivid engravings.
Five Safety Protections
Safety is paramount with the Falcon2, which includes a flame detector, bidirectional limit switch, safety lock, emergency stop button, and laser detection cover. These features minimize accidental operations and ensure user safety.
Convenient Offline Operation
The Falcon2 supports offline creation, allowing users to work without a computer. Simply insert a TF card to create designs anytime, anywhere. The laser engraver can also dynamically preview and adjust designs offline for precise results.
Control Software
Compatible with LightBurn and LaserGRBL software, the Falcon2 provides flexible and comprehensive control options for all engraving and cutting tasks.
Creality Falcon2 FAQ
Machine
400mm*415mm
Semiconductor laser unit - 40W
It will stop working. The machine will be initialized when powered on.
The imported image should be clear. Make sure that focusing correctly before engraving and
the power and speed are appropriate.
Check that the screws are tight and the belt is not too loose or too tight.
The tightness of the belt is appropriate if the laser module can slide slowly on the X-axis
profile perpendicular to the desktop by gravity, and any pulley in the laser module has no empty sliding.
Ensure that the material to be engraved is flat. Observe the gradienter on the machine to
ensure that the machine is horizontal, and has been properly adjusted according to the operation method of the user manual.
Please place the multi-level fixed focus bar between the laser module and the processed
material. Follow the tips and make the bottom of the laser module contact with the corresponding surface of the multi-level fixed focus bar. Finally lock it with two hand screws on the right.
The laser may penetrate the material and damage the workbench (especially when cutting). It is recommended to place objects on the bottom that cannot be penetrated by the laser, such as
stainless steel plates, aluminum alloy plates, etc.
1.Please check if the TF card is inserted. The machine reads the latest engraving file(.gcode/.gc) in the root directory of the TF card by default. It is recommended to delete other engraving files in
the root directory.
2. The gcode file can only be generated by LightBurn. If gc file is generated by default, please modify the file suffix to gcode manually.
In preview mode and engraving mode, if the machine turns on it side or moves, it will turn off the laser. Motor stops moving, indicator light flashing, and buzzer emits alarm.
Solution: Please move the machine to its original position and press “Frame” or “Start/Pause” button on the control panel to continue previewing or engraving after clearing abnormality.
1. Check the power plug is plugged in properly.
2. Check the power outlet is properly powered.
3. Check the power switch, emergency stop switch and child lock on the machine are turned
on.
The machine adopts the design of shading and eye protection, and integrates the MEMS
attitude sensor. The laser module will stop working when the machine turns on it side abnormally. Even so, we still recommend that you wear goggles during working.
The machine has four limit switches. If the laser module exceeds the engraving area of the machine during working, the buzzer will beep and the machine stops working. At this time, it is necessary to adjust the position of the laser module and check the size of the graphics.
The engraved graphics will be deformed and dislocated obviously：like a circle changes into an ellipse.
Engraving or Cutting
Engraving: Paper, Wood, Bamboo, Leather, Textile, Acrylic, Painted Metal, Plastic, etc.
Cutting: Paper, Wood, Bamboo, Cloth, Leather, Fabric, Acrylic, Plastic, etc.
Yes, but the radian of the material should not be too large. Otherwise there will be slight
deformation.
Yes, but you need to apply anti-reflective material on the surface of the material before engraving to ensure the engraving effect and preventing the reflected light from damaging the laser module.
Use this text to answer questions in as much detail as possible for your customers.
Reduce the power appropriately and use the air assist from Creality.
1.Ensure that the machine and engraving material are parallel to the workbench;
2.Ensure that the protective lens of the laser module is clean;
3. Refer to the user manual and focus correctly;
4. Refer to the recommended parameters in TF card；
5. Gradually increase the number of passes or reduce the cutting speed appropriately；
The powerful and stable airflow can blow away the smoke and dust effectively during cutting, protecting the lens of the laser module and ensuring the stability of the laser energy. It can reduce the surface temperature of the cutting material quickly. Blow away the hot smoke and dust
to keep material surfaces clean. Make the cutting edge smoother and more delicate.
It is recommended to use weak airflow when engraving, and strong airflow when cutting (the effect depends on the specific material).
Software
LaserGRBL（Free）
LightBurn（Paid - 30 Days Free Trial）
LaserGRBL（bmp/png/jpg/gif/svg)
LightBurn（bmp/png/jpg/jpeg/gif/tif/tiff/tga/ai/pdf/sc/dxf/hpgl/plt/rd/svg）
The TF card comes with the machine.
You can get more detailed tutorials from:
LaserGRBL（https://lasergrbl.com/usage/）
LightBurn（https://lightburnsoftware.github.io/NewDocs/）
Unzip the package and install the driver in the device manager manually.
1. Ensure that the Type-C data cable has the communication function and the end of the data cable connected to the computer is a USB-A interface.
2. Ensure that you have imported the Creality Falcon2.lbdev file successfully.
3. The corresponding COM port of the machine is not occupied.
4. If it still can't be connected, please record a video and tell the customer service your system information and the version of software.
You may also be interested in
3Duncle.com
At 3Duncle, our mission is to make 3D printing fun and accessible to everyone. We strive to be the best online 3d printer sales platform by providing affordable and reliable products, exceptional service and passionate technical support.
Join us in creating a thriving 3D where everyone can experience the joy of bringing their ideas to life.